• cpbj

Aluminum Foam High-Efficiency Acoustic Panels Tunnel Sound Deadening and Noise Reduction

Short Description:

Closed-cell foam aluminum plate is perforated to make high-efficiency acoustic plate (Φ2mm holes, perforation rate of 1~3%), which has excellent sound absorption performance, and the sound absorption rate can reach 60%~90%. Since the surface of this material has no plane, it has excellent surface diffuse reflection sound absorption function, and at the same time, it has the sound absorption function of perforated Helmholtz resonance absorber, which ensures a high sound absorption rate.


  • Density: 0.25g/cm3~0.75g/cm3
  • Void rate: 75%~90%
  • Absorption energy: 8J/m3 ~ 30J/m3
  • Compressive strength: 3Mpa ~ 17Mpa
  • Flexural strength: 3Mpa~15Mpa
  • Product Detail

    Product Tags

    Product Description:
    Closed-cell foam aluminum panels are made into high-efficiency sound-absorbing panels after perforation treatment (Φ2mm holes, perforation rate of 1-3%), which have excellent sound-absorbing performance, and the sound-absorbing rate can reach 60% to 90%. Since the surface of this material has no plane, it has excellent surface diffuse reflection sound absorption function, and at the same time, it has the sound absorption function of perforated Helmholtz resonance acoustic absorber, which ensures a high sound absorption rate. In addition, in the humid environment, ordinary acoustic material absorbs water and expands, the sound absorption coefficient is greatly reduced, while the aluminum foam material does not absorb water, its sound absorption rate does not decrease.

    sound absorbtion system

    Aluminum foam plate behind the set of different thickness of the air layer, the main frequency of sound absorption is different, with the thickness of the air layer from 0mm to 90mm, the main frequency of sound absorption from 2000Hz down to 300Hz or so. When the thickness of the air layer is 10, 30, 60, 90mm, the main frequency of the maximum sound absorption rate are 1000Hz, 500Hz, 400Hz, 300Hz or so. According to the noise frequency distribution design foam rate acoustic panel behind the air layer thickness. Highway, under-river tunnels, undersea tunnels and other automobile generated noise main frequency of about 400Hz, for low-frequency noise, so the highway sound barriers, under-river and undersea tunnels sound-absorbing wall aluminum foam acoustic panels behind the setting of the 60mm thick air layer, noise reduction effect is good. Railroad noise is medium and high frequency noise above 1000Hz, 20mm thick air layer is set behind the aluminum foam sound-absorbing plate with good noise reduction effect.

    Noise Barrier workshop-1

    Product Characteristics:
    Density: 0.25g/cm3~0.75g/cm3;
    Void rate: 75%~90%;
    Absorption energy: 8J/m3 ~ 30J/m3;
    Compressive strength: 3Mpa ~ 17Mpa;
    Flexural strength: 3Mpa~15Mpa;
    Aperture: uniformly distributed 1-10mm, main aperture 4-8mm;
    Fireproof performance does not burn, does not produce toxic gases;
    Corrosion resistance, long service life.
    Product specification: 1200mm*600mm*H or customized production according to customer requirements.

    Aluminum Foam High-Efficiency Acoustic Panels Tunnel Sound Deadening and Noise Reduction


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Noise Barrier

      Noise Barrier

      H post used for support noise barriers/sound barriers Suggest size for h post: surface treatment: galvanized and pvc coated 100X100X6X8mm 125X125X6.5X9mm 150X150X7X10mm 175X175X7.5X11mm 200X200X8X12mm Noise Barrier/sound barriers Features Easy to install. Modular design, flexible, quick and easy installation and removal. High sound absorption. Especially good noise reduction effect. High-intensity: The structure design is based on different climate conditions and wind load. Sheet is punched ...

    • Simulation Flexible Aluminum Foam for, Architectural decoration, sound insulation and noise reduction

      Simulation Flexible Aluminum Foam for, Archite...

      Products Description Modified inorganic powder composite building flexible decorative sheet product is a kind of flexible, thin and light, which is made of water-soluble high molecular polymer as surface material, high molecular polymer and inorganic filler as bottom layer, and is automatically composited. Flexible sheet, the thickness of the sheet reaches 3 mm, the finished product is called (soft porcelain) inorganic powder composite building flexible decorative sheet. The development and ...

    • 20mm Thick Aluminum Foam Sound-absorbing Aluminum Sandwich for Sound Barrier Walls

      20mm Thick Aluminum Foam Sound-absorbing Alumin...

      Product Description: 20mm Thick Foam Aluminum Sound Barrier Wall Sandwich is a high-performance acoustic material consisting of a foam aluminum core material sandwiched between two sound-absorbing aluminum panels. This structure gives it excellent acoustic performance and strong sound insulation capacity. This sound barrier wall sandwich can effectively reduce sound transmission and provide a quiet environment for a variety of applications. Product Features: 1. Efficient sound absorption: so...

    • Sound Barrier Series Railway Sound Barrier

      Sound Barrier Series Railway Sound Barrier

      Beihai composite railroad sound barrier is divided into reflective type sound barrier with pure sound insulation, and composite sound barrier with combination of sound absorption and sound insulation, the latter is made for more effective sound insulation. Most of the sound barriers choose the mixed type of sound absorption and sound insulation, which is characterized by targeted control of the generation and transmission characteristics of railroad noise. Railroad sound barrier specificatio...

    • Sound-absorbing through-cell aluminum foam

      Sound-absorbing through-cell aluminum foam

      Product Description: Acoustic Through-Cell Foam Aluminum is a material used in acoustic absorption and soundproofing applications. It is made by forming a continuous through-cell structure in an aluminum alloy substrate. Product Features: 1. Acoustic absorption performance: the through-cell structure of aluminum foam can effectively absorb sound wave energy. The sound wave will be reflected and scattered many times after entering the through holes, so that the sound wave energy will be grad...