News

1. What is metal foam? Metal foam is a porous metal with a porosity of more than 90% and a certain strength and hardness. This product is a metal material containing pore foam, the porosity is higher than that of ordinary sintered porous...

Aluminum foam is added into pure aluminum powder after foaming process, and has both metal and bubble characteristics. It has low density, high shock absorption ability, high temperature resistance, strong fire resistance, corrosion resi...

The thermal properties of metal foam include melting point, specific heat, thermal expansion coefficient, thermal conductivity, thermal diffusivity, thermal radiation and thermal shock resistance, some of which are the same as the matrix...

The foam metal demister is used to separate the liquid droplets entrained by the gas in the tower to ensure mass transfer efficiency, reduce the loss of valuable materials and improve the operation of the compressor after the tower. Gene...

Will you delay the delivery due to the unstable supply of nickel foam manufacturers, with high quality and low price? In fact, you are not alone, most of the demand side of nickel foam will face this problem. Only a few large enterprises...

With the rapid development of electronic technology, more and more electronic products and equipment are used in people's production and life. Computers, radios and other transmitting equipment generate electromagnetic waves of different...

Foamed copper is a new type of multifunctional material with a large number of connected and non-connected pores evenly distributed on the copper base. Foamed copper has good electrical conductivity and ductility. Compared with foamed ni...

Metal foam has the characteristics of high porosity, large specific surface area, good ductility and high thermal conductivity, and has good hydrodynamic properties. It has very significant advantages in catalytic reactions of gases and ...

Low density and light weight: the density range is 0.5-1.1g/cm3, compared with dense aluminum, the lowest density is about 25% of aluminum; Heat resistance: the operating temperature can reach 300℃; Impact resistance: It is not as direct...

1. Ultralight The density is 0.2~0.4g/cm3, which is about 1/10 of the density of aluminum, 1/20 of the density of titanium, 1/30 of the density of steel, 1/30 of the density of steel, and 1/3 of the density of wood. 2. Sound absorption T...

The lightweight structure, energy absorption and noise control of imported aluminum foam new materials make it have a wide range of applications in the automotive and transportation industries. Vehicles are increasingly developing in the...

Aluminum foam is obtained by mixing aluminum alloy powder with a substance separated during heating and gasification. It has the characteristics of light weight, high porosity and high specific surface area. It has both the characteristi...