How to install aluminum foam panels?

Wall Installation Steps:
1. Dry-hanging: Choose dry-hanging or gluing according to climatic conditions and wind-blocking design.
2. Main keel: install the main keel.
3. secondary keel: install the secondary keel.
4. Hanging board or self-tapping nails combined with gluing: use hanging board or self-tapping nails combined with gluing to fix the aluminum foam panel.
5. gluing: choose dry hanging or gluing according to the weather conditions and wind-blocking design.

Ceiling installation method:
1. gluing: ceiling installation can be freely designed for gluing, I-beam hanging, magnetic suction.
2. I-beam hanging: Use I-beam hanging for installation.
3. Magnetic suction: use magnetic suction for installation.

Detailed steps of construction process:
1. Material Preparation: Prepare aluminum foam panel, installation parts (support frame, pull girl, angle code, screws, etc.) and installation tools (drill, hammer, screwdriver, electric saw, etc.).
2. Pre-treatment work: Determine the installation position and nodes of aluminum foam panel according to the design drawings, clean up the installation surface to ensure that the surface is flat and clean, reinforce the installation support points, and ensure that the installation spacing meets the design requirements.
3. Construction process:

• Drill holes according to the marked position and reserve holes of appropriate size.
• Install the support bracket, tighten the screws and adjust the level of the bracket.
• Place the aluminum foam panel on the support frame, locate and fix it with angle yards.
• Insert the puller into the top of the aluminum foam panel, and then gently tap it with a hammer to make sure it is firmly installed.
• Connect the joints between the panels with screws and angle yards, taking care that the angle yards are positioned in line with the header of the panel below.
• If necessary, you can use a chainsaw to adjust the size of the boards to your actual needs.
• Finally, use a hammer to check whether the aluminum foam panel is firmly installed, and confirm the completion of the subsequent process.