Yadda za a kafa aluminum kumfa panels?

Matakan Shigar bango:
1. Busassun rataye: Zaɓi busassun rataye ko gluing bisa ga yanayin yanayi da ƙirar hana iska.
2. Main keel: shigar da babban keel.
3. Keel na sakandare: shigar da keel na sakandare.
4. Allon rataye ko ƙusoshi masu ɗaure kai da aka haɗa tare da manne: yi amfani da allon rataye ko kusoshi masu ɗaukar kai a haɗe tare da manne don gyarawa.aluminum kumfa panel.
5. gluing: zaɓi busassun rataye ko gluing bisa ga yanayin yanayi da ƙirar hana iska.

Hanyar shigar rufi:
1. gluing: rufi shigarwa za a iya da yardar kaina tsara don gluing, I-beam rataye, Magnetic tsotsa.
2. I-beam rataye: Yi amfani da I-beam rataye don shigarwa.
3. Magnetic tsotsa: yi amfani da tsotsa Magnetic don shigarwa.

Cikakken matakan tsarin gini:
1. Shirye-shiryen Kayan aiki: Shirya aluminum kumfa panel, shigarwa sassa (firam goyon baya, ja yarinya, kusurwa code, sukurori, da dai sauransu.) da kuma shigarwa kayan aikin (dill, guduma, screwdriver, lantarki saw, da dai sauransu).
2. Pre-jiyya aiki: Ƙayyade da shigarwa matsayi da nodes naaluminum kumfa panelbisa ga zane-zane na zane-zane, tsaftace shimfidar wuri don tabbatar da cewa farfajiyar ta kasance mai laushi da tsabta, ƙarfafa wuraren goyon bayan shigarwa, da kuma tabbatar da cewa tazarar shigarwa ta dace da bukatun ƙira.
3. Tsarin gini:

• Hana ramuka bisa ga alamar matsayi kuma ajiye ramukan girman da suka dace.
• Shigar da madaidaicin goyan bayan, ƙarfafa sukurori kuma daidaita matakin madaidaicin.
• Sanya kwamitin kumfa na aluminum akan firam ɗin tallafi, gano wuri kuma gyara shi tare da yadudduka na kusurwa.
• Saka mai ja a samanaluminum kumfa panel, sannan a matsa a hankali tare da guduma don tabbatar da an shigar da shi sosai.
• Haɗa haɗin haɗin tsakanin bangarori tare da sukurori da yadudduka na kusurwa, kula da cewa an saita yadudduka na kusurwa a layi tare da shugaban kwamitin da ke ƙasa.
• Idan ya cancanta, zaku iya amfani da chainsaw don daidaita girman allunan zuwa ainihin bukatunku.
• A ƙarshe, yi amfani da guduma don bincika ko an shigar da panel ɗin kumfa na aluminum, kuma tabbatar da kammala aikin na gaba.