Copper Foam
Product Description:
Copper foam has great function of conducting heat and electricity, which can be used as the electrode substrate of lithium ion battery or fuel cell or Nickel zinc battery and electric double layer capacitor electrode material.
Product Specification:
|
Copper foam sheet |
|
|
Pore Size |
5PPI to 80PPI |
|
Density |
0.25g/m3 to 1.00g/cm3 |
|
Porosity |
90% to 98% |
|
Thickness |
5mm to 30mm |
|
Maximum width |
500mm x 1000mm |
|
Component content |
||||||
|
Element |
Cu |
Ni |
Fe |
S |
C |
Si |
|
Guideline(ppm) |
Balance |
0.5~5% |
≤100 |
≤80 |
≤100 |
≤50 |
Workshop
Application areas:
The copper foam can be also used as Heat sink materials, heat absorption materials, chemical catalyst carrier, electromagnetic shielding materials,filtration materials, damping materials, battery electrode materials, deadening, high-grade decorative materials.
Related products
-
How to make copper foam?
Copper foam is a new type of multifunctional material with a large number of connected or non-connected pores evenly distributed on the copper matrix. Copper foam has good conductivity and ductility. Compared with nickel foam, it has low preparation cost and good conductivity, and can be used to prepare battery negative electrode (carrier) material, catalyst carrier and electromagnetic shielding material. In particular, foamed copper has some obvious advantages as a substrate for battery ele...
