• cpbj

15mm metal perforated plate foam iron nickel grease filters

Short Description:

Adopting 3D gradient arrangement of metal honeycomb structure, when the grease particles pass through the net, it will change its forward route, so that it will continuously collide and finally adsorb the grease on the filter.
The surface of the filter mesh is attached with a smooth and non-sticky nano-metal layer, and the grease flows smoothly from the filter mesh into the oil-guiding tank, and is finally collected and processed.
This method adopts physical purification, does not consume electricity, is energy-saving and environmentally friendly, and has a long service life.


Product Detail

Product Tags

Product Structure:

▪Frame: galvanized frame, aluminum (original color), stainless steel
-Filter mesh: foam iron nickel
▪Mesh guard: sieve mesh, diamond mesh, perforated plate
Size: length * width * height (customized according to customer requirements)

Purification Principle:
Adopting 3D three-dimensional gradient arrangement of metal honeycomb structure, when the particles of oil smoke pass through the net, it will change its forward route, so that it will continuously collide and finally adsorb the oil smoke on the filter.
The surface of the filter mesh is attached with a smooth and non-sticky nano-metal layer, and the grease flows smoothly from the filter mesh into the oil-guiding tank, and is finally collected and processed.
This method adopts physical purification, no power consumption, energy saving and environmental protection and long service life.

Foamed Iron Nickel Fume Filter

Performance Parameters:
▪Cost saving: it can reduce more than 80% of flue cleaning work and save more than 80% of flue cleaning cost in one year;
▪High interception rate: can intercept more than 93% of the particles, so that the flue without oil accumulation;
▪Low wind resistance: <100Pa.
▪Long life: made of stainless steel, acid and alkali resistant and corrosion resistant;
▪High fire rating: A1 non-combustible, avoiding flue fire;
▪Environmental protection to meet the standard: after installation to realize the normalization of fumes to meet the standard discharge, to meet the requirements of environmental protection;
▪Simple cleaning: water gun directly rinsing;
▪Protection of equipment: effectively extend the service life of other smoke exhaust, ventilation, filtration and other equipment.

Foamed Iron Nickel Fume Filter-

Features:
▪Large oil capacity, high temperature resistance, can be fireproof, effective filtration of grease, dust and powder; to eliminate the flue fire hazards, grease and smoke to meet the emission standards.
▪Not easy to oxidize long life, can be cleaned and used repeatedly, saving operating costs.
▪Can be customized according to the equipment non-standard, customized for you.

Applications:
Machining oil mist purification; heat treatment quenching smoke purification; die-casting and injection molding workshop air purification; catering fume purifier pre-filter;

appliance

Thickness 1-30mm (can be customized), regular: 10mm or 15mm
Size 500*500mm/ 500*600mm/200*300mm (can be customized)
Density 5-500PPI (can be customized), regular: 18-20PPI
Water pressure impact resistance 3-6Pa
Porosity >98%
Porosity 95-98%
Soot interception rate >93%
Wind resistance <100Pa
High temperature resistance 1450 degrees (melting point)
Fireproof grade A1, non-combustible

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Iron nickel foam for sound-absorbing materials

      Iron nickel foam for sound-absorbing materials

      Product Introduction Iron nickel foam is an excellent performance sound absorption material with high sound absorption coefficient at high frequency; through the design of sound absorption structure, it can improve the sound absorption performance at low frequency. Product Characteristics Good sound insulation performance When sound passes through nickel foam, scattering and interference occur in the porous structure of the material, so that sound energy is absorbed by the material or blocke...

    • Nickel Foam

      Nickel Foam

      Product Description Porous metal foam is a new type of porous structure metal material with a certain number and size pore size and a certain porosity. The material has the characteristics of small bulk density, large specific surface area, good energy absorption, high specific strength and specific rigidity. The through-hole body has strong heat exchange and heat dissipation capabilities, good sound absorption performance, and excellent permeability and permeability. Foam metal with differen...

    • Porous foam metal series–Nickel foam

      Porous foam metal series–Nickel foam

      Nickel foam is a newcomer in the family of “porous metals”. It is made of nickel foam sponge with three-dimensional through-net structure through high-tech deep processing. The specific weight is 0.2~0.3, which is 1/4 of water, 1/3 of wood, 1/10 of aluminum, 1/30 of iron, and the porous structure has wide frequency sound absorption characteristics. It can be cut, bent, and simply adhered, and has strong thermal conductivity. The homogeneous three-dimensional mesh structure has the...

    • Porous Metal Materials Foam Alloy Materials High Temperature Foam Nickel Chromium

      Porous Metal Materials Foam Alloy Materials Hig...

      Product Description Porous foam metal is a new type of energy-saving carrier material, according to the characteristics of porous foam metal, with a shape that can be suitable for the reaction process. It has enough specific surface area and high pore structure, which can evenly support the active components on its surface and provide a place for catalytic reaction. Sufficient mechanical strength to withstand mechanical or thermal shock during the reaction process. The gas is buffered when it...

    • Porous nickel foam electrode catalyst carrier capacitor battery filter metal foam nickel ultra-thin experimental material

      Porous nickel foam electrode catalyst carrier c...

      Pore Characteristics and Bulk Density Pore size: 0.1mm-10mm (5-120ppi) Porosity: 50%-98% Through pore rate: ≥98% Bulk density: 0.1-0.8g/cm3 Main Features 1, ultra-light quality: has a large specific surface area, specific gravity of 0.2 ~ 0.3, is 1/4 of water, 1/3 of wood, 1/10 of metal aluminum, 1/30 of iron, ultra-light quality. 2、Sound absorption: The porous structure has the characteristics of wide frequency sound absorption. 3、Electron wave shielding: Through the relatively thin thic...